kukko 121-282 screw punch ø 29.3 mm for uniformly punching plastic support rods for distance sensors as well as for stamping holes in thin-w Locking Plier This internal bearing puller kit

This internal bearing puller kit is specifically designed to avoid damage to the bearing housing

letting you easily support the puller and quickly connect each jaw one at a time to the pulley without help Pullers can also be converted to two- and three-leg pullers Jaws can be reversed from external to internal style in seconds Maximum spread of 3-1/4 inches Specifications

20m Thermometer mode Yes Bearing mode (pre-set at 110 °C/230 °F) Yes Power reduction 2-step

Effective height

UKCA Display 2

kukko 121-282 screw punch ø 29.3 mm for uniformly punching plastic support rods for distance sensors as well as for stamping holes in thin-w Locking Plier This internal bearing puller kitThe screw punches of series 121 are used for uniformly punching plastic support rods for distance sensors as well as for stamping holes in thin walled materials. During the working process, the workpiece is not deformed. Each screw punch consists of a punch, a die, and a pressure screw in a particularly stable design. Special cutting geometry prevents the detachment of the carriage paint Can be used without any problems on already painted bumpers.