K+M Carbide Cutting Pilot w/Flutes, 270 Calibre/6.8MM Die Style_Bushing Bump Neck Sizer Die 375 Bullet Weight 350gr Bullet

375 Bullet Weight 350gr Bullet Style TSX Flat Base Ballistic Coefficient 0

260 Sectional Density 0

62 X 39 brass offers match quality that no other manufacturer has for this calibre

Once the holder and ram-prime are set

277 Bullet Weight 120 gr Bullet Style SST Boat Tail Ballistic Coefficient G1 0

K+M Carbide Cutting Pilot w/Flutes, 270 Calibre/6.8MM Die Style_Bushing Bump Neck Sizer Die 375 Bullet Weight 350gr BulletThis finely ground carbide cutting pilot, designed for use with the K+M case neck turning body, has four cutting flutes used to remove the doughnut that can form at the inside neck wall and shoulder junction. If you are noticing the formation of a doughnut, this tool will remove the excess material without affecting inside neck diameter allowing for uniform bullet seating and eliminate powder gas restriction. There is also less friction between brass